IEI Technology WSB-Q354 User Manual Download Page 34

Page: 34 / 205

WSB-Q354 PICMG 1.0 CPU Card

Page 19

Figure 2-8: SATA Drive Connectors

2.5.5 Intel

ICH9R PCI Interface

The PCI interface on the ICH9R is compliant with the PCI Revision 2.3 implementation.

Some of the features of the PCI interface are listed below.

PCI Revision 2.3 compliant

33MHz

5V tolerant PCI signals (except PME#)

Integrated PCI arbiter supports up to seven external PCI bus masters

The PCI bus is connected to an interface gold finger on the bottom of the CPU card. For

more detailed information, please refer to

Section 2.6.2

2.5.6 Intel

ICH9R Serial Peripheral Interface (SPI) BIOS

The SPI is connected to an SPI BIOS chip. A licensed copy of AMI BIOS is preinstalled on

the SPI BIOS chip.

2.5.7 Intel

ICH9R USB Controller

2.5.7.1 Intel

ICH9R USB Controller Overview

Up to twelve high-speed, full-speed or low-speed USB devices are supported by the

ICH9R on the WSB-Q354. High-speed USB 2.0, with data transfers of up to 480MB/s, is

enabled with the ICH9R integrated Enhanced Host Controller Interface (EHCI) compliant

Summary of Contents for WSB-Q354














































































































































































































Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands

IEI Technology WSB-Q354, User Manual

Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands