IEI Technology WSB-Q354 User Manual Download Page 17

Page: 17 / 205

WSB-Q354 PICMG 1.0 CPU Card

Page 2

1.1 Overview

Figure 1-1: WSB-Q354 PICMG 1.0 CPU Card

The WSB-Q354 also comes with dual PCI Express (PCIe) Gigabit Ethernet (GbE) and has

flexible storage options including support for six second-generation serial ATA (SATA)

with SATA RAID configuration and a floppy disk drive (FDD). The WSB-Q354 provides

additional connectivity for one parallel, two RS-232 serial and up to seven USB 2.0

devices. Support for a (optional) trusted platform module (TPM) provides additional

system security during system boot-up.

1.1.1 WSB-Q354 Features

Some of the WSB-Q354 features are listed below.

Supports the following Intel® LGA775 processors:

Intel® Core™2 Duo (45nm and 65nm)

Intel® Core™2 Quad (45nm and 65nm)

Intel® Celeron® (65nm, with a 800 MHz FSB or above)

Supports four 240-pin 2 GB 667 MHz or 800 MHz DDR2 DIMMs

Six SATA 3Gb/s drives with transfer rates of 3.0 Gbps supported

Seven USB 2.0 devices supported (six onboard and one on the rear panel)

Dual GbE Ethernet connectors

PICMG 1.0 form factor

Summary of Contents for WSB-Q354














































































































































































































Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands

IEI Technology WSB-Q354, User Manual

Search results

Summary of Contents for WSB-Q354

Reviews:

Brands by name

Popular brands