background image

 

 

WAFER-ULT3/ULT4 3.5" SBC 

Page 77

5.3.3 ACPI Settings 

The 

ACPI Settings

 menu (

BIOS Menu 5

) configures the Advanced Configuration and 

Power Interface (ACPI) options. 

Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 
ACPI Settings 
 
 

ACPI  Sleep  State 

[S3 (CPU Stop Clock)]

 

 
Select the highest ACPI 
sleep state the system 
will enter when the 
SUSPEND button is 
pressed. 
---------------------- 

ÆÅ

: Select Screen 

 

: Select Item 

Enter: Select 
+/-:  Change  Opt. 
F1: General 

Help 

F2: Previous 

Values 

F3: Optimized 

Defaults

F4:  Save & Exit 
ESC: Exit 
 

Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc. 

BIOS Menu 5: ACPI Settings

 

Î

 

ACPI Sleep State [S3 (Suspend to RAM)] 

Use the 

ACPI Sleep State

 option to specify the sleep state the system enters when it is 

not being used. 

Î

 

S3 (Suspend to 

RAM) 

D

EFAULT

The caches are flushed and the CPU is powered 

off. Power to the RAM is maintained. The 

computer returns slower to a working state, but 

more power is saved. 

Summary of Contents for WAFER-UTL3







































































































































Reviews: