IEI Technology WAFER-UTL3 User Manual Download Page 81

Page: 81 / 134

WAFER-ULT3/ULT4 3.5" SBC

Page 68

4.11 Driver Installation

All the drivers for the WAFER-ULT3/ULT4 are on the CD that came with the system. To

install the drivers, please follow the steps below.

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. Visit the IEI website or

contact technical support for the latest updates.

Step 1:

Insert the CD into a CD drive connected to the system.

NOTE:

If the installation program doesn't start automatically:

Click "Start->My Computer->CD Drive->autorun.exe"

Step 2:

The driver main menu appears. Click WAFER-ULT3/ULT4.

Step 3:

A new screen with a list of available drivers appears.

Step 4:

Install all of the necessary drivers in the menu.

Step 0:

Summary of Contents for WAFER-UTL3







































































































































Search results

Summary of Contents for WAFER-UTL3

Reviews:

Related manuals for WAFER-UTL3

Brands by name

Popular brands

IEI Technology WAFER-UTL3, User Manual

Search results

Summary of Contents for WAFER-UTL3

Reviews:

Related manuals for WAFER-UTL3

Brands by name

Popular brands