IEI Technology WAFER-ULT3, User Manual

Page: 109 / 136

WAFER-ULT3/ULT4 3.5" SBC
Page 95
5.4.1.2.1 LCD Control
Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.
Chipset
LCD Control
Primary IGFX Boot Display [VBIOS Default]
On board LVDS [Disabled]
Select the video Device
which will be activated
during POST. This has no
effect if external
graphics present.
Secondary boot display
selection will appear
based on your selection.
VGA modes will be
supported only on
primary display.
---------------------

: Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
BIOS Menu 20: LCD Control

Primary IGFX Boot Display [VBIOS Default]
Use the Primary IGFX Boot Display option to select the display device used by the
system when it boots. Configuration options are listed below.

VBIOS Default D
EFAULT

HDMI

LVDS

VGA1/DP1

On board LVDS [Disabled]
Use the On board LVDS option enables or disables the on-board LVDS connector.

Disabled D
EFAULT
The on-board LVDS connector is disabled.

Enabled
The on-board LVDS connector is disabled.