IEI Technology WAFER-ULT3, User Manual

Page: 73 / 136

WAFER-ULT3/ULT4 3.5" SBC
Page 59
4.6.7 VGA/iDP Selection Switch
CN Label: J_VGA_DP1
CN Type: Switch
CN Location: See Figure 4-14
CN Settings: See Table 4-7
Use the VGA/iDP selection switch to select VGA mode or iDP mode since the iDP
connector (DP1) is co-lay with the VGA connector. The VGA/iDP selection switch settings
are shown in
Table 4-7 .
Setting Description
Short A-B VGA mode (Default)
Short B-C IEI Internal DisplayPort mode
Table 4-7: VGA/iDP Selection Switch Settings
The location of the VGA/iDP selection switch is shown in Figure 4-14 below.
Figure 4-14: VGA/iDP Selection Switch Location