IEI Technology WAFER-ULT3, User Manual

Page: 101 / 136

WAFER-ULT3/ULT4 3.5" SBC
Page 87

Bits per second [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.

9600
Sets the serial port transmission speed at 9600.

19200
Sets the serial port transmission speed at 19200.

57600
Sets the serial port transmission speed at 57600.

115200 D
EFAULT
Sets the serial port transmission speed at 115200.

Data Bits [8]
Use the Data Bits option to specify the number of data bits.

7 Sets the data bits at 7.

8 D
EFAULT
Sets the data bits at 8.

Parity [None]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.

None D
EFAULT
No parity bit is sent with the data bits.

Even The parity bit is 0 if the number of ones in the data
bits is even.

Odd The parity bit is 0 if the number of ones in the data
bits is odd.

Mark The parity bit is always 1. This option does not
provide error detection.

Space The parity bit is always 0. This option does not
provide error detection.