WAFER-BT
P a g e 71
the CPU is at a very high temperature and therefore cause the system
to be damaged.
The
Temperature of Off
option can only be set if the
CPU Smart Fan control
option is
set to
Auto Mode
. If the CPU temperature is lower than
Temperature of Off
, the fan
speed change to be lowest. To set a value, select the
Temperature of Off
option and
enter a decimal number between 0 and 127. The temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
Te m p e ra tu re o f S ta rt [80
WARNING:
Setting this value too high may cause the fan to rotate at full speed only
when the CPU is at a very high temperature and therefore cause the
system to be damaged.
The
Temperature of Start
option can only be set if the
CPU Smart Fan control
option is
set to
Auto Mode
. If the CPU temperature is between
Temperature of Off
and
Temperature of Start
, the fan speed change to be
Start PWM
. To set a value, select the
Temperature of Start
option and enter a decimal number between 0 and 127. The
temperature range is specified below.
Minimum Value: 0°C
Maximum Value: 127°C
S ta rt P WM [30]
The
Start PWM
option can only be set if the
CPU Smart Fan control
option is set to
Auto
Mode
. Use the
Start PWM
option to set the PWM start value. To set a value, select the
Start PWM
option and enter a decimal number between 0 and 100. The temperature
range is specified below.
Summary of Contents for WAFER-BT
