IEI Technology WAFER-BT, User Manual

Page: 68 / 114

WAFER-BT
P a g e 56
S te p 1:
Locate the USB Series "A" receptacle connectors . The locations of the USB
Series "A" receptacle connectors are shown in Chapter 3 .
S te p 2:
Insert a USB Series "A" plug . Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
Figure 4-12.
Figure 4-12: USB Connector
4.6.4 VGA Mo n ito r Co n n e c tio n
The WAFER-BT has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the WAFER-BT, please follow the instructions below.
S te p 1: Locate the female DB-15 connector . The location of the female DB-15
connector is shown in Chapter 3 .
S te p 2:
Align the VGA connector . Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.