IEI Technology WAFER-BT, User Manual

Page: 67 / 114

WAFER-BT
P a g e 55
4.6.2 S e ria l De vic e Co n n e c tio n
The WAFER-BT has two single female DB-9 connectors on the external peripheral
interface panel for a serial device. Follow the steps below to connect a serial device to the
WAFER-BT.
S te p 1:
Locate the DB-9 connector . The locations of the DB-9 connectors are shown
in Chapter 3 .
S te p 2:
Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-11 .
Figure 4-11: Serial Device Connector
S te p 3:
Secure the connector . Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connecto
4.6.3 US B Co n n e c tio n
The external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the WAFER-BT.