IEI Technology WAFER-945GSE2 User Manual Download Page 129

Page: 129 / 204

WAFER-945GSE2 User Manual

Page 112

Disabled

No POST procedures are skipped

Enabled D

EFAULT

Some POST procedures are skipped to decrease

the system boot time

Quiet Boot [Disabled]

Use the

Quiet Boot

BIOS option to select the screen display when the system boots.

Disabled D

EFAULT

Normal POST messages displayed

Enabled

OEM Logo displayed instead of POST messages

AddOn ROM Display Mode [Force BIOS]

The

AddOn ROM Display Mode

option allows add-on ROM (read-only memory)

messages to be displayed.

Force BIOS

EFAULT

Allows the computer system to force a third party

BIOS to display during system boot.

Keep Current

Allows the computer system to display the

information during system boot.

Bootup Num-Lock [Off]

The

Bootup Num-Lock

BIOS option allows the Number Lock setting to be modified

during boot up.

Off D

EFAULT

Does not enable the keyboard Number Lock automatically. To

use the 10-keys on the keyboard, press the Number Lock key

located on the upper left-hand corner of the 10-key pad. The

Number Lock LED on the keyboard lights up when the Number

Lock is engaged.

Allows the Number Lock on the keyboard to be enabled

automatically when the computer system boots up. This allows

the immediate use of the 10-key numeric keypad located on

the right side of the keyboard. To confirm this, the Number

Summary of Contents for WAFER-945GSE2













































































































































































































Search results

Summary of Contents for WAFER-945GSE2

Reviews:

Related manuals for WAFER-945GSE2

Brands by name

Popular brands

IEI Technology WAFER-945GSE2, User Manual

Search results

Summary of Contents for WAFER-945GSE2

Reviews:

Related manuals for WAFER-945GSE2

Brands by name

Popular brands