IEI Technology WAFER-945GSE2, User Manual

Page: 21 / 204

WAFER-945GSE2 User Manual
Page 4
1 x RS-232 serial port connector
2 x Serial ATA (SATA) drive connectors
2 x USB 2.0 connectors (supports four USB 2.0 devices)
The WAFER-945GSE2 has the following external peripheral interface connectors on the
board rear panel.
2 x Ethernet connectors
1 x RS-232/422/485 serial port connector
2 x USB connectors
1 x VGA connector
The WAFER-945GSE2 has the following on-board jumpers:
AT Power mode setting
Clear CMOS
CF card setting
COM2 Port mode setting
LVDS1 Voltage selection
1.2.3 Technical Specifications
WAFER-945GSE2 technical specifications are listed in
7
Table 1-1 . See Chapter 2 for
details.
Specification WAFER-945GSE2
Form Factor
3.5”
System CPU 45 nm 1.6 GHz Intel® Atom™ N270
Front Side Bus (FSB) 533 MHz
System Chipset
Northbridge: Intel® 945GSE
Southbridge: Intel® ICH7-M
Memory Onboard 533 MHz 1.0 GB DDR2 SDRAM
CompactFlash®
One CompactFlash® Type II socket
Super I/O
ITE IT8718