IEI Technology WAFER-945GSE2 User Manual Download Page 4

Page: 4 / 204

WAFER-945GSE2 User Manual

Page iv

Packing List

NOTE:

If any of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the WAFER-945GSE2 from or contact an IEI

sales representative directly. To contact an IEI sales representative,

please send an email to [email protected].

The items listed below should all be included in the WAFER-945GSE2 package.

1 x WAFER-945GSE2

2 x SATA Cable (P/N: 32000-062800-RS)

1 x KB/MS Cable (P/N: 32000-023800-RS)

1 x Audio Cable (P/N: 32000-072100-RS)

2 x Plastic Intermediate Pole for PC/104 (15mm)

2 x Plastic Intermediate Pole for PC/104 (20mm)

1 x Mini Jumper pack

1 x Utility CD

1 x QIG (quick installation guide)

Images of the above items are shown in

Chapter 3

Summary of Contents for WAFER-945GSE2













































































































































































































Search results

Summary of Contents for WAFER-945GSE2

Reviews:

Related manuals for WAFER-945GSE2

Brands by name

Popular brands

IEI Technology WAFER-945GSE2, User Manual

Search results

Summary of Contents for WAFER-945GSE2

Reviews:

Related manuals for WAFER-945GSE2

Brands by name

Popular brands