IEI Technology UPC-F12C-ULT3 User Manual Download

Page: 48 / 114

UPC-F12C-ULT3 Panel PC

Page 34

4.3.1 ACPI Settings

The

ACPI Settings

menu (

BIOS Menu 3

) configures the Advanced Configuration and

Power Interface (ACPI) options.

Advanced

ACPI Settings

ACPI Sleep State

[S3 (Suspend to RAM]

Select the highest ACPI
sleep state the system
will enter when the
SUSPEND button is
pressed.

----------------------



: Select Screen

↑

↓

: Select Item

Enter

Select

+/-: Change Opt.
F1:  General Help
F2:  Previous Values
F3:  Optimized Defaults
F4:  Save & Exit
ESC: Exit

BIOS Menu 3: ACPI Settings



ACPI Sleep State [S3 (Suspend to RAM)]

Use the

ACPI Sleep State

option to specify the sleep state the system enters when it is

not being used.



S3 (Suspend to

RAM)

EFAULT

The caches are flushed and the CPU is powered

off. Power to the RAM is maintained. The

computer returns slower to a working state, but

more power is saved.

Summary of Contents for UPC-F12C-ULT3



















































































































Search results

Summary of Contents for UPC-F12C-ULT3

Reviews:

Related manuals for UPC-F12C-ULT3

Brands by name

Popular brands

IEI Technology UPC-F12C-ULT3, User Manual

Search results

Summary of Contents for UPC-F12C-ULT3

Reviews:

Related manuals for UPC-F12C-ULT3

Brands by name

Popular brands