IEI Technology UPC-F12C-ULT3 User Manual Download

Page: 16 / 114

UPC-F12C-ULT3 Panel PC

Page 2

1.1 Overview

Figure 1-1: UPC-F12C-ULT3 Panel PC

The UPC-F12C-ULT3 series is a quad-core Intel

Core™ i5-6300U or Intel

Celeron

3955U powered panel PC with a rich variety of functions and peripherals.

The aluminum die-casting design and the IP66 enclosure make the UPC-F12C-ULT3 an

ideal system for use in harsh environment.

The Intel

Core™ i5-6300U / Celeron

3955U is a System-on-Chip (SoC) that ensures

optimal memory, graphics, and peripheral I/O support. The system comes with 4.0 GB of

DDR4 SO-DIMM memory ensuring smooth data throughputs with reduced bottlenecks

and fast system access.

Multiple connectors ensure simplified connectivity to a variety of external peripheral

devices, including GbE LAN, RS-232/422/485 and USB ports.

Summary of Contents for UPC-F12C-ULT3



















































































































Search results

Summary of Contents for UPC-F12C-ULT3

Reviews:

Related manuals for UPC-F12C-ULT3

Brands by name

Popular brands

IEI Technology UPC-F12C-ULT3, User Manual

Search results

Summary of Contents for UPC-F12C-ULT3

Reviews:

Related manuals for UPC-F12C-ULT3

Brands by name

Popular brands