IEI Technology UPC-F12C-ULT3, User Manual

Page: 29 / 114

UPC-F12C-ULT3 Panel PC
Page 15
3.2 Installation Precautions
CAUTION:
The UPC-F12C-ULT3 series has more than one power supply
connection point.
To reduce the risk of electric shock, disconnect all power sources
before installing or servicing the UPC-F12C-ULT3 series.
When installing the panel PC, please follow the precautions listed below:

Power turned off : When installing the panel PC, make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or
damage to the system.

Certified Engineers : Only certified engineers should install and modify
onboard functionalities.

Anti-static Discharge : If a user open the rear panel of the panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear an anti-static wristband.
3.3 HDD Installation
To install the HDD into the system, please follow the steps below:
Step 1: Remove the HDD slot cover located on the rear panel by removing the two
retention screws.