IEI Technology UPC-F12C-ULT3 User Manual Download

Page: 39 / 114

UPC-F12C-ULT3 Panel PC

Page 25

3.8 Powering On the System

To power on the UPC-F12C-ULT3 panel PC, follow the steps below:

Step 1:

Connect either the DC jack or the terminal block of the system to a power source.

The two power connector pinouts are shown below.

Figure 3-15: Power Input Jack Pinouts

Figure 3-16: Power Input Terminal Block Pinouts

Step 2:

In ATX mode, long press the power button on the front panel for around five

seconds until the LED lights up in green to power up the system.

In AT mode, the UPC-F12C-ULT3 will turn on automatically once power is

connected to the power connector; short press the power button to turn off/on

the system.

Step 0:

NOTE:

The UPC-F12C-ULT3 has the capability to support ACC power mode.

For more details about this function, please contact an IEI sales

representative directly by sending an email to

[email protected]

Summary of Contents for UPC-F12C-ULT3



















































































































Search results

Summary of Contents for UPC-F12C-ULT3

Reviews:

Related manuals for UPC-F12C-ULT3

Brands by name

Popular brands

IEI Technology UPC-F12C-ULT3, User Manual

Search results

Summary of Contents for UPC-F12C-ULT3

Reviews:

Related manuals for UPC-F12C-ULT3

Brands by name

Popular brands