IEI Technology TANK-801, User Manual

Page: 66 / 98

TANK-801 Em b e d d e d S ys te m
P a g e 56

None D
EFAULT
No parity bit is sent with the data bits.

Even The parity bit is 0 if the number of ones in the data
bits is even.

Odd The parity bit is 0 if the number of ones in the data
bits is odd.

Mark The parity bit is always 1. This option does not
provide error detection.

Space The parity bit is always 0. This option does not
provide error detection.

S to p Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.

1 D
EFAULT
Sets the number of stop bits at 1.

2
Sets the number of stop bits at 2.