IEI Technology TANK-801 User Manual Download Page 4 | Manualshive

Page: 4 / 98

background image

TANK-801 Em b e d d e d S ys te m

P a g e iv

WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and(2) this device must accept any
interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

—

Reorient or relocate the receiving antenna.

—

Increase the separation between the equipment and receiver.

—

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—

Consult the dealer or an experienced radio/ TV technician for help.

You are cautioned that any change or modifications to the equipment not expressly
approve by the party responsible for compliance could void your authority to operate
such equipment.

IMP ORTANT NOTE:

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body

.

«
...
2
3
4
5
6
...
»

Summary of Contents for TANK-801



































































































Reviews:

No comments

Related manuals for TANK-801

BTL PA0400 Series

Brand: Balluff Pages: 22

Micropulse BTL5 Series

Brand: Balluff Pages: 12

BTL PA0400 Series

Brand: Balluff Pages: 204

Brand: NARGESA Pages: 34

Brand: Datalogic Pages: 188

Brand: Wachs Pages: 22

Brand: Cole Parmer Pages: 28

SANDBLASTER SLS

Brand: SINTERIT Pages: 20

Brand: R.V.R. Elettronica Pages: 34

Brand: Ditch Witch Pages: 133

Brand: FLENDER Pages: 66

GRIT GXR Series

Brand: Fein Pages: 16

Brand: National Instruments Pages: 55

Brand: Erbe Pages: 208

$R.V.R. Elettronica TCP/IP-INT-TEX User Manual preview$

Brand: R.V.R. Elettronica Pages: 26

RS97-1024EGZ Series

Brand: Magnescale Pages: 70

Power Defense PDG1 Series

Brand: Eaton Pages: 7

Brand: R.V.R. Elettronica Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands