IEI Technology TANK-801, User Manual

Page: 37 / 98

TANK-801 Em b e d d e d S ys te m
P a g e 27
Figure 3-16: DisplayPort Connection
S te p 3: Insert the DisplayPort connector. Gently insert the DisplayPort connector. The
connector should engage with a gentle push. If the connector does not insert
easily, check again that the connector is aligned correctly, and that the connector
is being inserted with the right way up.
3.7.7 DVI Co n n e c to r
The TANK-801 has one female DVI-I connector on the front panel. The DVI connectors
are connected to digital display devices. To connect a digital display device to the
TANK-801, please follow the instructions below.
S te p 1:
Locate the DVI connector . The location of the DVI connector is shown in
Chapter 1 .
S te p 2:
Align the DVI connector . Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
S te p 3: Insert the DVI connector . Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the TANK-801. See Figure 3-17.