6
1.1 Specifications :
•
CPU
: Celeron™ 300
- 550Mhz or above Processor
Pentium® III(FC-PGA) 450 - 700Mhz or above Processor VIA
Cyrix®
¢ »
466MHz or above
•
FSB
: Support 66/100/133MHz
•
Bus
: PCISA connector with PCI signal only, compatible to Jump
PISA Ver. 1.07
•
DMA channels
: 7
•
Interrupt levels
: 15
•
Chipset
: Intel 810E(810/810DC-100)
•
RAM memory
: Single 168-pin DIMM sockets support SDRAM
module. The max memory is up to 256MB.
•
Ultra ATA/33/66
IDE Interface
: Two PCI Enhance IDE hard
drives. The south bridge ICH0/ICH supports Ultra ATA/33/66 IDE
interface.
•
Floppy disk drive interface
: Single 2.88 MB, 1.44MB, 1.2MB,
720KB, or 360KB floppy disk drive.
•
Two high speed Series ports
: NS16C550 compatible UARTs
•
Bi-directional Parallel Port
•
Built-in IT8712 to monitor power supply voltage and fan
speed status.
•
IrDA port : Support Serial Infrared(SIR) and Amplitude Shift
Keyed IR(ASKIR) interface.
•
USB port : Support two USB ports for future expansion.
•
AC’97 Codec :
Support two channel Left/Right Line IN/OUT, MIC
IN, CD IN, and PC beep sound for buzzer.
•
Watch-Dog Timer
: can be set by 1,2,3… 255 seconds/minutes
period. Reset or NMI was generated when CPU did not
periodically trigger the timer. Your program use
INT15
to control
the watch-dog and generate a system reset.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com