31
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power
up the computer. If it is set to Enable, BIOS will shorten or skip some
check items during POST.
Enabled
Enable quick POST
Disabled
Normal POST
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in
the sequence selected in these items.
The Choice: Floppy, LS120, HDD0-3, SCSI, CDROM, ZIP 100 , LAN,
Disabled.
Swap Floppy Drive
If the system has two floppy drives, you can swap the logical drive
name assignments.
The choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The choice: Enabled/Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The choice: On/Off.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
