IEI Technology PPC2-C ADL Series User Manual Download Page 14

Page: 14 / 87

PPC2-Cxxx-ADL Series Panel PC

Page 2

1.1

Overview

Figure 1-1: PPC-Cxxx-ADL Panel PC

The PPC-Cxxx-ADL panel PC is powered by 12th Gen Intel® Core

™ i9/i7/i5/i3 and

Pentium® Processor.

The PPC-Cxxx-ADL is a heavy industrial panel PC with rugged and trendy design which

can be applied in harsh industrial environments and enriches aesthetic experience at the

same time.

The major external device connections include USB 3.2 Gen 2 (10Gb/s), USB 2.0, serial

port, VGA and HDMI connectors. The PPC-Cxxx-ADL has one PCIe Gen4 x16 slot, one

M.2 E-key and one M.2 M-key slots, allowing installation of a wide variety of PCIe card

solutions, such as a Wi-Fi module and graphics card.

Summary of Contents for PPC2-C ADL Series
























































































Search results

Summary of Contents for PPC2-C ADL Series

Reviews:

Related manuals for PPC2-C ADL Series

Brands by name

Popular brands

IEI Technology PPC2-C ADL Series, User Manual

Search results

Summary of Contents for PPC2-C ADL Series

Reviews:

Related manuals for PPC2-C ADL Series

Brands by name

Popular brands