IEI Technology PPC2-C ADL Series, User Manual

Page: 52 / 87

PPC2-Cxxx-ADL Series Panel PC
Page 40
All peripheral devices are connected
The system is securely mounted
Power-on Procedure
To power-on the PPC2-Cxxx-ADL Series please follow the steps below:
Step 1: Connect the power source to the power inlet on the bottom panel.
Step 2: Press the power switch to power up the system.
Figure 3-31: Power Switch
3.13 Reset the System
The reset button enables users to reboot the system when the system is turned on. The
reset button location is shown in Figure 3-32. Press the reset button to reboot the system.
Figure 3-32: Reset Button Location
3.14 Clear CMOS
If the PPC-Cxxx-ADL fails to boot due to improper BIOS settings, the clear CMOS button
clears the CMOS data and resets the system BIOS information. To do this, push the clear
CMOS button for three seconds, and then restart the system. The clear CMOS button