IEI Technology PPC-FxxA-H81 User Manual Download Page 83

Page: 83 / 176

PPC-FxxA-H81 Panel PC

Page 70

Wake system with Fixed Time [Disabled]

Use the

Wake system with Fixed Time

option to enable or disable the system wake on

alarm event.

Disabled D

EFAULT

The real time clock (RTC) cannot generate a wake

event

Enabled

If selected, the

Wake up every day

option appears

allowing you to enable to disable the system to wake

every day at the specified time. Besides, the

following options appear with values that can be

selected:

Wake

date

Wake

hour

Wake up minute

Wake

second

After setting the alarm, the computer turns itself on

from a suspend state when the alarm goes off.

Summary of Contents for PPC-FxxA-H81

















































































































































































Search results

Summary of Contents for PPC-FxxA-H81

Reviews:

Related manuals for PPC-FxxA-H81

Brands by name

Popular brands

IEI Technology PPC-FxxA-H81, User Manual

Search results

Summary of Contents for PPC-FxxA-H81

Reviews:

Related manuals for PPC-FxxA-H81

Brands by name

Popular brands