IEI Technology PPC-FxxA-H81 User Manual Download Page 36

Page: 36 / 176

PPC-FxxA-H81 Panel PC

Page 23

3.6 HDD Installation

3.6.1 PPC-F15A/F17A-H81 HDD Installation

To install a 2.5” HDD into the PPC-F15A/F17A-H81, please follow the steps below:

Step 1:

Remove the back cover

. See

Section

3.5

Step 2:

Remove the HDD bracket from the PPC-F15A/F17A-H81

. The HDD bracket is

secured on the panel PC with four retention screws (

Figure 3-2

). Remove the

four retention screws and lift the bracket off the panel PC.

Figure 3-2:

PPC-F15A/F17A-H81 HDD Bracket Retention Screws

Step 3:

Attach the hard drive to the bracket

. To do this, slide the hard drive onto the

bracket until it connects with the SATA connector at the back.

Step 4:

Secure the hard drive to the bracket

. Secure the hard drive to the bracket with

four retention screws (

Figure 3-3

Summary of Contents for PPC-FxxA-H81

















































































































































































Search results

Summary of Contents for PPC-FxxA-H81

Reviews:

IEI Technology PPC-FxxA-H81, User Manual, Page: 36 / 176

Search results

Summary of Contents for PPC-FxxA-H81

Reviews: