IEI Technology PPC-51 A-H61 Series User Manual Download Page 56

Page: 56 / 156

PPC-51xxA-H61 Panel PC

Page 43

3.11 Mounting the System

WARNING!

When mounting the PPC-51xxA-H61 panel PC, it is advisable to have

more than one person help with the installation to prevent accidental

damage to the panel and avoid personal injury.

The methods of mounting the PPC-51xxA-H61 are:

Wall

mounting

Panel

mounting

Arm

mounting

Stand

mounting

Rack

mounting

The mounting methods are described in the following sections.

3.11.1 Wall Mounting

To mount the PPC-51xxA-H61 panel PC onto a wall, please follow the steps below.

Step 1:

Select the location on the wall for the wall-mounting bracket.

Step 2:

Carefully mark the locations of the four bracket screw holes on the wall.

Step 3:

Drill four pilot holes at the marked locations on the wall for the bracket retention

screws.

Step 4:

Align the wall-mounting bracket screw holes with the pilot holes.

Step 5:

Secure the mounting bracket to the wall by inserting the retention screws into

the four pilot holes and tightening them (

Figure 3-22

Summary of Contents for PPC-51 A-H61 Series





























































































































































Search results

Summary of Contents for PPC-51 A-H61 Series

Reviews:

Brands by name

Popular brands

IEI Technology PPC-51 A-H61 Series, User Manual

Search results

Summary of Contents for PPC-51 A-H61 Series

Reviews:

Brands by name

Popular brands