IEI Technology PPC-51 A-H61 Series User Manual Download Page 148

Page: 148 / 156

PPC-51xxA-H61 Panel PC

Page 135

C.2.2 Cleaning Tools

Some components in the EP series may only be cleaned using a product specifically

designed for the purpose. In such case, the product will be explicitly mentioned in the

cleaning tips. Below is a list of items to use when cleaning the EP series.



Cloth

– Although paper towels or tissues can be used, a soft, clean piece of

cloth is recommended when cleaning the EP series.

Water or rubbing alcohol

– A cloth moistened with water or rubbing alcohol

can be used to clean the EP series.

Using solvents

– The use of solvents is not recommended when cleaning the

EP series as they may damage the plastic parts.

Vacuum cleaner

– Using a vacuum specifically designed for computers is

one of the best methods of cleaning the EP series. Dust and dirt can restrict

the airflow in the EP series and cause its circuitry to corrode.

Cotton swabs

- Cotton swaps moistened with rubbing alcohol or water are

excellent tools for wiping hard to reach areas.

Foam swabs

- Whenever possible, it is best to use lint free swabs such as

foam swabs for cleaning.

Summary of Contents for PPC-51 A-H61 Series





























































































































































Search results

Summary of Contents for PPC-51 A-H61 Series

Reviews:

Brands by name

Popular brands

IEI Technology PPC-51 A-H61 Series, User Manual

Search results

Summary of Contents for PPC-51 A-H61 Series

Reviews:

Brands by name

Popular brands