IEI Technology PICOe-9452 User Manual Download Page 155

Page: 155 / 250

PICOe-9452 Half-size CPU Card

Page 137



Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.



Disabled

Legacy USB support disabled



Enabled D

EFAULT

Legacy USB support enabled



Auto

Legacy USB support disabled if no USB devices are

connected



USB 2.0 Controller Mode [HiSpeed]

Use the

USB 2.0 Controller Mode

option to set the speed of the USB2.0 controller.



FullSpeed

The controller is capable of operating at 12Mb/s



HiSpeed D

EFAULT

The controller is capable of operating at 480Mb/s

6.3.7 Power Configuration

Use the

Power Configuration

menu (see BIOS Menu 10) to configure both the ACPI and

the APM settings.

Summary of Contents for PICOe-9452



























































































































































































































































Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands

IEI Technology PICOe-9452, User Manual

Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands