IEI Technology PICOe-9452 User Manual Download Page 141

Page: 141 / 250

PICOe-9452 Half-size CPU Card

Page 123



Async DMA

: Indicates the highest Asynchronous DMA Mode that is

supported.



Ultra DMA

: Indicates the highest Synchronous DMA Mode that is supported.



S.M.A.R.T.

: Indicates whether or not the Self-Monitoring Analysis and

Reporting Technology protocol is supported.



32Bit Data Transfer

: Enables 32-bit data transfer.



Type [Auto]

Use the

Type

BIOS option select the type of device the AMIBIOS attempts to boot from

after the Power-On Self-Test (POST) is complete.



Not Installed

BIOS is prevented from searching for an IDE disk

drive on the specified channel.



Auto D

EFAULT

The BIOS auto detects the IDE disk drive type

attached to the specified channel. This setting should

be used if an IDE hard disk drive is attached to the

specified channel.



CD/DVD

The CD/DVD option specifies that an IDE CD-ROM

drive is attached to the specified IDE channel. The

BIOS does not attempt to search for other types of

IDE disk drives on the specified channel.



ARMD

This option specifies an ATAPI Removable Media

Device. These include, but are not limited to:



ZIP



LS-120

Summary of Contents for PICOe-9452



























































































































































































































































Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands

IEI Technology PICOe-9452, User Manual

Search results

Summary of Contents for PICOe-9452

Reviews:

Related manuals for PICOe-9452

Brands by name

Popular brands