IEI Technology PICOe-9452, User Manual

Page: 98 / 250

PICOe-9452 Half-size CPU Card
Page 80
o
When working with the PICOe-9452, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the PICOe-9452 DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the PICOe-9452 is properly installed.
 All the items in the packing list are present
 The CPU is installed
 The CPU cooling kit is properly installed
 A compatible memory module is properly inserted into the slot
 The CF Type I or CF Type II card is properly installed into the CF socket
 The jumpers have been properly configured
 The PICOe-9452 is inserted into a chassis with adequate ventilation
 The correct power supply is being used
 The following devices are properly connected
o
IDE device
o
SATA drives
o
Keyboard and mouse cable
o
Audio kit
o
Power supply
o
USB cable
o
Serial port cable
o
Parallel port cable
 The following external peripheral devices are properly connected to the
chassis:
o
VGA screen