IEI Technology PCIE-9152 Page 147 User Manual Download

Page: 147 / 194

PCIE-9152 PCIMG 1.3 CPU Card

Page 131

7.1 Available Software Drivers

NOTE:

The content of the CD may vary throughout the life cycle of the product

and is subject to change without prior notice. You may visit the IEI

website or contact technical support for the latest updates.

The following drivers can be installed on the system.

Chipset

driver

VGA

driver

LAN

driver

Installation instructions are given below.

7.2 Driver CD Auto-run

All the drivers for the PCIE-9152 are on the CD that came with the system. To install the

drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

Step 2:

The starts up automatically

Step 3:

Select PCIE-9152 from the initial menu shown in

Figure 7-1

Summary of Contents for PCIE-9152



































































































































































































Search results

Summary of Contents for PCIE-9152

Reviews:

Related manuals for PCIE-9152

Brands by name

Popular brands

IEI Technology PCIE-9152, User Manual

Search results

Summary of Contents for PCIE-9152

Reviews:

Related manuals for PCIE-9152

Brands by name

Popular brands