IEI Technology PCIE-9152 Page 86 User Manual Download

Page: 86 / 194

PCIE-9152 PCIMG 1.3 CPU Card

Page 70

Figure 5-12: IDE Cable Connection

Step 6:

Connect the cable to an IDE device

. Connect the two connectors on the other

side of the cable to one or two IDE devices. Make sure that pin 1 on the cable

corresponds to pin 1 on the connector

Step 0:

5.6.3 5.1 Channel Audio Kit Installation

NOTE:

This is an optional item that must be ordered separately. For further

information please contact the nearest PCIE-9152 distributor, reseller

or vendor or contact an iEi sales representative directly. Send any

queries to

[email protected]

The optional 5.1 channel audio kit connects to the 10-pin audio connector on the

PCIE-9152. The audio kit consists of three audio jacks. One audio jack, Mic In, connects

to a microphone. The remaining two audio jacks, Line-In and Line-Out, connect to two

speakers. To install the audio kit, please refer to the steps below:

Step 1:

Connect the audio kit cable.

The audio kit is shipped with a cable that

connects the audio kit to the PCIE-9152. Connect the cable to the connector on

Summary of Contents for PCIE-9152



































































































































































































Search results

Summary of Contents for PCIE-9152

Reviews:

Related manuals for PCIE-9152

Brands by name

Popular brands

IEI Technology PCIE-9152, User Manual

Search results

Summary of Contents for PCIE-9152

Reviews:

Related manuals for PCIE-9152

Brands by name

Popular brands