IEI Technology NANO-QM871-i1, User Manual

Page: 109 / 156

NANO-QM871-i1 EPIC SBC
Page 96
Even The parity bit is 0 if the number of ones in the data
bits is even.
Odd The parity bit is 0 if the number of ones in the data
bits is odd.
Mark The parity bit is always 1. This option does not
provide error detection.
Space The parity bit is always 0. This option does not
provide error detection.
Stop Bits [1]
Use the Stop Bits option to specify the number of stop bits used to indicate the end of a
serial data packet. Communication with slow devices may require more than 1 stop bit.
1 D
EFAULT
Sets the number of stop bits at 1.
2
Sets the number of stop bits at 2.