IEI Technology Nano-PV-D4251 User Manual Download Page 55

Page: 55 / 153

NANO-PV-D4251/N4551/D5251 EPIC SBC

Page 42

4.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the NANO-PV-D4251/N4551/D5251 is

installed. All installation notices pertaining to the installation of the

NANO-PV-D4251/N4551/D5251 should be strictly adhered to. Failing

to adhere to these precautions may lead to severe damage of the

NANO-PV-D4251/N4551/D5251 and injury to the person installing the

motherboard.

4.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be carefully

followed in order to prevent damage to the

NANO-PV-D4251/N4551/D5251, NANO-PV-D4251/N4551/D5251

components and injury to the user.

Before and during the installation please

the following:

Read the user manual:

The user manual provides a complete description of the

NANO-PV-D4251/N4551/D5251 installation instructions and

configuration options.

Wear an electrostatic discharge cuff (ESD):

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the NANO-PV-D4251/N4551/D5251 on an antistatic pad:

Summary of Contents for Nano-PV-D4251


























































































































































Search results

Summary of Contents for Nano-PV-D4251

Reviews:

Related manuals for Nano-PV-D4251

Brands by name

Popular brands

IEI Technology Nano-PV-D4251, User Manual

Search results

Summary of Contents for Nano-PV-D4251

Reviews:

Related manuals for Nano-PV-D4251

Brands by name

Popular brands