IEI Technology KINO-QM57A, User Manual

Page: 79 / 160

KINO-QM57A Mini-ITX SBC
Page 65
4.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ
Audio devices
ƒ
HDMI devices
ƒ
RJ-45 Ethernet cable connectors
ƒ
RS-232 serial port
ƒ
USB devices
ƒ
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding KINO-QM57A external peripheral interface connector making
sure the pins are properly aligned.
4.8.1 Audio Connector
The audio jacks on the external audio connector enable the KINO-QM57A to be
connected to a stereo sound setup. To install the audio devices, follow the steps below.
Step 1: Identify the audio plugs . The plugs on your home theater system or speakers
may not match the colors on the rear panel. If audio plugs are plugged into the
wrong jacks, sound quality will be very bad.
Step 2: Plug the audio plugs into the audio jacks . Plug the audio plugs into the audio
jacks. If the plugs on your speakers are different, an adapter will need to be used
to plug them into the audio jacks.
ƒ
Line Out port (Lime): Connects to a headphone or a speaker.
ƒ
Microphone (Pink): Connects to a microphone.