IEI Technology KINO-QM57A User Manual Download Page 63

Page: 63 / 160

KINO-QM57A Mini-ITX SBC

Page 49

4.4.1 Socket G CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

To install a socket G CPU onto the KINO-QM57A, follow the steps below:

WARNING:

When handling the CPU, only hold it on the sides. DO NOT touch the

pins at the bottom of the CPU.

Step 1:

Unlock the CPU retention screw.

When shipped, the retention screw of the

CPU socket should be in the unlocked position. If it is not in the unlocked

position, use a screwdriver to unlock the screw. See

Figure 4-1

Summary of Contents for KINO-QM57A

































































































































































Search results

Summary of Contents for KINO-QM57A

Reviews:

Related manuals for KINO-QM57A

Brands by name

Popular brands

IEI Technology KINO-QM57A, User Manual

Search results

Summary of Contents for KINO-QM57A

Reviews:

Related manuals for KINO-QM57A

Brands by name

Popular brands