IEI Technology KINO-9454 User Manual Download Page 5

Page: 5 / 189

KINO-9454 Mini-ITX SBC

Page 5

CAUTION:

This is an example of a caution message. Failure to adhere to cautions

messages may result in permanent damage to the KINO-9454. Please

take caution messages seriously.

NOTE:

These messages inform the reader of essential but non-critical information. These

messages should be read carefully as any directions or instructions contained therein can

help avoid making mistakes. Notes are easy to recognize. The word “note” is written as

“

NOTE

,” both capitalized and bold and is followed by text. The text is the cautionary

message. A note message is shown below:

NOTE:

This is an example of a note message. Notes should always be read.

Notes contain critical information about the KINO-9454. Please take

note messages seriously.

Summary of Contents for KINO-9454






























































































































































































Search results

Summary of Contents for KINO-9454

Reviews:

IEI Technology KINO-9454, User Manual, Page: 5 / 189

Search results

Summary of Contents for KINO-9454

Reviews: