IEI Technology KINO-9454, User Manual, Page: 29 / 189

KINO-9454 Mini-ITX SBC
Page 29
Intel
®
Celeron
®
D
2.13 to 3.33GHz 256KB to 512KB 533MHz LGA775
Table-2-1: Supported CPUs
2.5 Intel
®
945G Graphics and Memory Controller Hub
2.5.1 Intel
®
945G Overview
The Intel® 945G GMCH consists of a graphics and memory controller hub (GMCH). The
GMCH on the Intel® 945G is interfaced to the Intel® I/O Controller Hub 7 (ICH7R) through
a high speed Direct Media Interface (DMI) chip-to-chip connection. The high-speed DMI
integrates priority based servicing that allows for concurrent traffic and true isochronous
transfer capabilities. Some of the features of the Intel® 945G are listed below.
Support 533/800/1066MHz FSB
Supports four, 1GB, 400/533/667MHz dual channel DDR SDRAM DIMMs
Integrated VGA and SDVO (Serial Digital Video Output) outputs
Integrated Intel
®
Graphics Media Accelerator 950 (Intel
®
GMA 950)
2.0GB/s concurrent DMI bandwidth maximizes chipset communications
PCIe x16 Graphics Interface with a raw bit rate on data pins of 2Gbps
Integrated Intel® High Definition Audio
Integrated Intel® Matrix Storage Technology
Integrated Intel® Active Management Technology
Integrated Intel® Flex Memory Technology
2.5.2 Intel
®
945G Memory Support
The Intel® 945G supports two, 2GB, 400/533/667MHz dual channel DDR SDRAM DIMMs.
Two 240-pin memory sockets on the KINO-9454 enable a maximum of 4GB of memory to
be installed on the system. The memory sockets are shown in Figure 2-1 .