IEI Technology KINO-9454 User Manual Download Page 37

Page: 37 / 189

KINO-9454 Mini-ITX SBC

Page 37

Integrated 10/100/1000BASE-T transceiver

Automatic MDI crossover function

PCIe v1.0a

10/100/1000BASE-T full/half-duplex MAC

Wake on LAN support meeting the ACPI requirements

Statistics for SNMP MIB II, Ethernet-like MIB, and Ethernet MIB (802.3z,

clause 30)

Serial EEPROM or serial flash support

JTAG support

2.8 LPC Bus Components

2.8.1 LPC Bus Overview

The LPC bus is connected to components listed below:

BIOS chipset

Super I/O chipset

2.8.2 BIOS Chipset

The BIOS chipset has a licensed copy of AMI BIOS installed on the chipset. Some of the

BIOS features are listed below:

AMI Flash BIOS

SMIBIOS (DMI) compliant

Console redirection function support

PXE (Pre-boot Execution Environment) support

USB booting support

2.8.3 Super I/O chipset

The iTE IT8712F Super I/O chipset is connected to the ICH7 through the LPC bus. The

iTE IT8712F is an LPC interface-based Super I/O device that comes with Environment

Controller integration. Some of the features of the iTE IT8712F chipset are listed below:

LPC Interface

Summary of Contents for KINO-9454






























































































































































































Search results

Summary of Contents for KINO-9454

Reviews:

IEI Technology KINO-9454, User Manual, Page: 37 / 189

Search results

Summary of Contents for KINO-9454

Reviews: