IEI Technology KINO-9454 User Manual Download Page 4

Page: 4 / 189

KINO-9454 Mini-ITX SBC

Page 4

Manual Conventions

WARNING!

Warnings appear where overlooked details may cause damage to the equipment or result

in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.

The word “warning” is written as “

WARNING

,” both capitalized and bold and is followed by

text. The text is the warning message. A warning message is shown below:

WARNING:

This is an example of a warning message. Failure to adhere to warning

messages may result in permanent damage to the KINO-9454 or

personal injury to the user. Please take warning messages seriously.

CAUTION!

Cautionary messages should also be heeded to help reduce the chance of losing data or

damaging the KINO-9454. Cautions are easy to recognize. The word “caution” is written

as “

CAUTION

,” both capitalized and bold and is followed. The italicized text is the

cautionary message. A caution message is shown below:

Summary of Contents for KINO-9454






























































































































































































Search results

Summary of Contents for KINO-9454

Reviews:

IEI Technology KINO-9454, User Manual, Page: 4 / 189

Search results

Summary of Contents for KINO-9454

Reviews: