IEI Technology KINO-6612LVDS, User Manual

Page: 205 / 227

KINO-6612 Mini-ITX Motherboard
Page 187
C.1 DIO Interface Introduction
The DIO connector on the KINO-6612 is interfaced to GPIO ports on the Winbond
W83697HG Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital
outputs. The digital inputs and digital outputs are generally control signals that control the
on/off circuit of external devices or TTL devices. Data can be read or written to the
selected address to enable the DIO functions.
NOTE:
For further information, please refer to the datasheet for the Winbond
W83697HG Super I/O chipset.
C.2 DIO Connector Pinouts
The following table describes how the DIO connector pins are connected to the Super I/O
GPIO port 1.
Pin Description Super I/O Pin Super I/O Pin Description
1 Ground N/A N/A
2 VCC N/A N/A
3 Input 0 GP10 General purpose I/O port 1 bit 0.
4 Input 1 GP11 General purpose I/O port 1 bit 1.
5 Input 2 GP12 General purpose I/O port 1 bit 2.
6 Input 3 GP13 General purpose I/O port 1 bit 3.
7 Output 0 GP14 General purpose I/O port 1 bit 4.
8 Output 1 GP15 General purpose I/O port 1 bit 5.
9 Output 2 GP16 General purpose I/O port 1 bit 6.
10 Output 3 GP17 General purpose I/O port 1 bit 7.