IEI Technology KINO-6612LVDS User Manual Download Page 135

Page: 135 / 227

KINO-6612 Mini-ITX Motherboard

Page 117

ZIP

LS-120

LBA/Large Mode [Auto]

Use the

LBA/Large Mode

option to disable or enable BIOS to auto detects LBA (Logical

Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the

maximum drive capacity is 137 GB.

Disabled

BIOS is prevented from using the LBA mode control on

the specified channel.

Auto D

EFAULT

BIOS auto detects the LBA mode control on the specified

channel.

Block (Multi Sector Transfer) [Auto]

Use the

Block (Multi Sector Transfer)

to disable or enable BIOS to auto detect if the

device supports multi-sector transfers.

Disabled

BIOS is prevented from using Multi-Sector Transfer on the

specified channel. The data to and from the device occurs

one sector at a time.

Auto D

EFAULT

BIOS auto detects Multi-Sector Transfer support on the

drive on the specified channel. If supported the data

transfer to and from the device occurs multiple sectors at

a time.

PIO Mode [Auto]

Summary of Contents for KINO-6612LVDS




































































































































































































































Search results

Summary of Contents for KINO-6612LVDS

Reviews:

Related manuals for KINO-6612LVDS

Brands by name

Popular brands

IEI Technology KINO-6612LVDS, User Manual

Search results

Summary of Contents for KINO-6612LVDS

Reviews:

Related manuals for KINO-6612LVDS

Brands by name

Popular brands