IEI Technology KINO-6612LVDS, User Manual

Page: 96 / 227

KINO-6612 Mini-ITX Motherboard
Page 78
o
RS-232 serial communications device
o
USB devices
5.3 Unpacking
When the KINO-6612 is unpacked, please check all the unpacking list items listed in
Chapter 3 are indeed present. If any of the unpacking list items are not available please
contact the KINO-6612 vendor reseller/vendor where the KINO-6612 was purchased or
contact an IEI sales representative.
5.4 CPU, CPU Cooling Kit and DIMM Installation
WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU,
KINO-6612 and other electronic components attached to the system
may be incurred. Running a CPU without a cooling kit may also result
in injury to the user.
The CPU, CPU cooling kit and DIMM are the most critical components of the KINO-6612.
If one of these component is not installed the KINO-6612 cannot run.
5.4.1 Socket 479 CPU Installation
WARNING:
CPUs are expensive and sensitive components. When installing the
CPU please be careful not to damage it in anyway. Make sure the CPU
is installed properly and ensure the correct cooling kit is properly
installed.