IEI Technology ITG-100-AL, User Manual

Page: 79 / 107

ITG-100-AL Embedded System
Page 67

Administrator Password
Use the Administrator Password to set or change a administrator password.

User Password
Use the User Password to set or change a user password.
5.6 Boot
Use the Boot menu ( BIOS Menu 19 ) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Launch PXE OpROM [Disabled]
Option ROM Messages [Force BIOS]
UEFI Boot [Disabled]
Boot Option Priorities
Boot Option #1 [P1: BIWIN SSD]
Hard Drive BBS Priorities
Select the keyboard
NumLock state
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4
Save
ESC Exit
Version 2.18.1263. Copyright (C) 2018 American Megatrends, Inc.
BIOS Menu 21: Boot

Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On D
EFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.