IEI Technology iSignager-1000-Q354, User Manual

Page: 152 / 189

iSignager-1000-Q354 Digital Signage Player
Page 138
Step 3:
Reinstall the ODD into the iSignager-1000-Q354 by aligning the retention screw
holes in the top of the ODD bracket with the retention screw holes on the
chassis. Reinsert the two previously removed retention screws into the ODD
bracket (
Figure 8-16
).
Step 4:
Reconnect the SATA and power cable connectors from the rear of ODD to the
motherboard and the power module.
Step 0:
8.4.7 PCIe Riser Card Replacement (Optional)
Step 1:
Remove the cover case. See
Section 8.3.1
.
Step 2:
Remove the expansion card installed on the PCIe riser card.
Step 3:
Remove the two retention screws on the PCIe riser card (
Figure 8-19
).
Figure 8-19: PCIe Riser Card Retention Screws
Step 4:
Pull the PCIe riser card out of the PCIe x4 and PCIe x16 sockets on the
motherboard.
Step 5:
Remove the wireless LAN module on the PCIe riser card.
Step 6:
Reinstall the wireless LAN module to the new PCIe riser card.
Step 7:
Insert the new PCIe riser card. Properly align the PCIe riser card pins with the
PCIe x4 and PCIe x16 sockets. Gently push the PCIe riser card into the two
PCIe sockets.