IEI Technology ISDM-084G User Manual Download Page 19

Page: 19 / 152

ISDM Series Industrial Monitor

Page 19

1.1 ISDM Series Industrial Monitor Overview

The ISDM series industrial monitor is the latest member of IEI’s line of sophisticated LCD

designs, and it has been improved to be RoHS compliant. With the stainless steel frame,

the ISDM series is ideal for strict hygiene conditions, such as hospital, kitchens, abattoirs

and other food processing plants. The ISDM series is also designed to fit industrial

automation, or any other applications that require minimum installation space and

flexible configuration. The flat front panel provides IP 65 protection, which effectively

wards off dust and water. Flexible analog or digital interfaces are provided for ease of

connection with a management computer. All the ISDM series models come with a

resistive type touch panels. If remote/non-attentive control is preferred, RS-232 or USB

interfaces can be used with customized adapter cables.

1.1.1 Standard Features

All the base models listed in

Section 1.2.1

have the following standard features

LCD monitor

Stainless steel front frame

Heavy-duty steel chassis

OSD function

IP 65 level protection

RoHS compliance

1.1.2 Model Variations

The ISDM LCD series have the following seven base models.

ISDM-084G:

8.4” LCD screen

ISDM-104G: 10.4”

LCD

screen

ISDM-121G: 12.1”

LCD

screen

ISDM-150G: 15”

LCD

screen

ISDM-170G: 17”

LCD

screen

ISDM-190G: 19”

LCD

screen

Summary of Contents for ISDM-084G

























































































































































Search results

Summary of Contents for ISDM-084G

Reviews:

Brands by name

Popular brands

IEI Technology ISDM-084G, User Manual

Search results

Summary of Contents for ISDM-084G

Reviews:

Brands by name

Popular brands