IEI Technology IRS-100-ULT3, User Manual

Page: 37 / 108

IRS-100-ULT3 Railway Surveillance System
Page 24
3.9 Mounting the System
To mount the IRS-100-ULT3 onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1:
Turn the IRS-100-ULT3 over.
Step 2:
Align the four retention screw holes in each bracket with the retention screw
holes on the sides of the bottom surface.
Step 3:
Secure the brackets to the system by inserting four retention screws into each
bracket (
Figure 3-14
).
Figure 3-14: Mounting Bracket Retention Screws
Step 4:
Drill holes in the intended installation surface.
Step 5:
Align the mounting holes in the sides of the mounting brackets with the predrilled
holes in the mounting surface.
Step 6:
Insert four retention screws, two in each bracket, to secure the system to the
wall.
Step 0: