IEI Technology IMBA-G410 User Manual Download Page 142

Page: 142 / 158

1288/17/2011158

Page 128

IMBA-G410 ATX Motherboard

Figure C-26: Recovery Tool Main Menu

The recovery tool has several functions including:

Factory Restore

: Restore the factory default image (iei.GHO) created in

Section

C.2.5

Backup system

: Create a system backup image (iei_user.GHO) which will be

saved in the hidden partition.

Restore your last backup

: Restore the last system backup image

Manual

: Enter the Symantec Ghost window to configure manually.

10.

Quit

: Exit the recovery tool and restart the system.

WARNING:

Please do not turn off the system power during the process of system

recovery or backup.

WARNING:

All data in the system will be deleted during the system recovery.

Please backup the system files before restoring the system (either

Factory Restore or Restore Backup).

Summary of Contents for IMBA-G410































































































































































Search results

Summary of Contents for IMBA-G410

Reviews:

Related manuals for IMBA-G410

Brands by name

Popular brands

IEI Technology IMBA-G410, User Manual

Search results

Summary of Contents for IMBA-G410

Reviews:

Related manuals for IMBA-G410

Brands by name

Popular brands