IEI Technology IMBA-G410 User Manual Download Page 72

Page: 72 / 158

588/17/2011158

Page 58

IMBA-G410 ATX Motherboard

Step 2:

Plug the audio plugs into the audio jacks

. Plug the audio plugs into the audio

jacks. If the plugs on your speakers are different, an adapter will need to be used

to plug them into the audio jacks.

Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.

Line Out port (Lime):

Connects to a headphone or a speaker.

Microphone (Pink):

Connects to a microphone.

Figure 4-17: Audio Connector

Step 3:

Check audio clarity

. Check that the sound is coming through the right speakers

by adjusting the balance front to rear and left to right.

Step 0:

4.6.2 PS/2 Keyboard and Mouse Connection

The IMBA-G410 has a dual PS/2 connector on the external peripheral interface panel. The

dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow

the steps below to connect a keyboard and mouse to the IMBA-G410.

Step 1:

Locate the dual PS/2 connector

. The location of the dual PS/2 connector is

shown in

Chapter 3

Summary of Contents for IMBA-G410































































































































































Search results

Summary of Contents for IMBA-G410

Reviews:

Related manuals for IMBA-G410

Brands by name

Popular brands

IEI Technology IMBA-G410, User Manual

Search results

Summary of Contents for IMBA-G410

Reviews:

Related manuals for IMBA-G410

Brands by name

Popular brands